How to choose common size diamond blades
Diamond blade is one of our common cutting tools, it can cut building decoration materials including marble, granite, concrete and ceramics.

At present, the common inches on the market are: 4 inches, 5 inches, 6 inches, 7 inches, 8 inches, 9 inches, 10 inches, 12 inches, 14 inches and 17 inches, etc. The common millimeters are: 115mm, 125mm, 150mm, 165mm, 180mm, 200mm, 300mm, 350mm, 400mm, 450mm and 500mm etc.

Looking at the dazzling array of diamond blade manufacturers on the market, buyers are confused, so it is very important to choose a suitable diamond blade, so how to choose a suitable diamond blade?

How to choose a diamond blade

1. Look at the color of the cutter head. The normal diamond saw blade head should be silver-white, with the natural color of iron. The inferior diamond saw blade is dark due to the large amount of impurities.

2. For the cutting effect, first of all, in the case of selecting the right cutting blade, refer to the data provided by the seller for cutting, and the cutting should be smooth and unobstructed, and the cut stone should not be chipped or cornered.

3. Observe whether the concentration and distribution of the exposed diamond particles on the blade head of the diamond saw blade are uniform. In order to reduce the cost of the inferior saw blade, the method of reducing the diamond content is used to reduce the cost. The process is extremely simple, and the uneven stirring of the diamond particles causes the force surface of the blade head Uneven, after the buyer uses it, not only does it not move, but it also consumes quickly.

4. The inferior saw blade uses corundum, the difference between corundum and diamond single crystal is that the abrasive grains are resistant to wear, and the diamond saw blade produced with corundum is not durable.

Diamond blade: Each Wanlong diamond blade will be strictly tested before leaving the factory, the tension will reach the state of use, avoid serious bumping during storage, and place it for suspension. If it must be placed horizontally, please ensure that the placement surface is level, and the saw blade Do not place heavy pressure on other items.

our service:

A: Every detail will be confirmed with you before production;

B: High-quality materials are used for tool making;

C: Every process is completed by our skilled workers;

D: Our experienced QC will check the products piece by piece before packing;

E: We will update the order and delivery status in time until you get the tool product smoothly.