In mining, we often use equipment such as wire saw machines, but do you know how to use wire saws to mine mines?

It mainly passes through four main points: punching holes, threading through holes, installing equipment and tools. The details are as follows:

1. Punch holes:

Punching is a key preparation work. If the hole is not punched well, it will directly affect the penetration of the beaded rope, affect the service life of the rope and the cutting efficiency, so the process of punching is particularly important. Drill three holes, one vertical and two horizontal.

2. Thread the rope through the hole:

At present, when the beaded rope is used in the stone industry, most of the artificial rope is used, that is, one end of the rope is fixed with a multi-strand loop cord, which is passed through one hole, and the wire is drawn out from the other hole, so that the beaded rope is passed through.

wire saw

3. Installation equipment:

After the beaded rope is passed through, the equipment is installed. Because the equipment is heavy, and after cutting a plane, the equipment needs to be readjusted, so a lifting device must be equipped around it, which can be lifted and installed at any time.

4. Water supply:

When cutting stone, due to the high linear speed of the rope, the friction between the rope and the stone is large. If water is not added or not enough, a lot of heat will be generated between the rope and the stone, which will not only deform the spring and wire rope, but may even melt the spring and stick it. Knot together and lose elasticity, which will reduce the service life of the beaded rope. In order to ensure the quality and life of the rope, water must be supplied, and the water must be added along the direction of movement of the rope.